Graphtec Plotter Driver OPS628 Ver. 10.00
for Microsoft Windows XP / Windows Vista / Windows 7

Thank you for choosing the Graphtec OPS628 Plotter Driver. 

The README.TXT file in each directory contains instructions on installation and
operation as well as other notes. Be sure to read them carefully before 
installing or using this driver.

Before you begin installation, check that the program disk contains the 
following:

  GDSETUP.EXE
  GDSETUP.INI

  WINXP_7\DISK1                 For Windows XP / Windows Vista / Windows 7
  WINXP_7\GPGL.DLL
  WINXP_7\GPGLUI.DLL
  WINXP_7\GPGLUI.CHM
  WINXP_7\OEMSETUP.INF
  WINXP_7\OEMSETUP.CAT
  WINXP_7\README.TXT
  WINXP_7\GX3000.GPD
  WINXP_7\MP5000.GPD
  WINXP_7\MP303.GPD
  WINXP_7\FP8000.GPD
  WINXP_7\FP9000.GPD
  WINXP_7\PT5M.GPD
  WINXP_7\CE1000.GPD
  WINXP_7\CE2000.GPD
  WINXP_7\CE2120AP.GPD
  WINXP_7\CE3000.GPD
  WINXP_7\CE3120AP.GPD
  WINXP_7\CE5120AP.GPD
  WINXP_7\FC2230.GPD
  WINXP_7\FC3200.GPD
  WINXP_7\FC3600.GPD
  WINXP_7\FC4100.GPD
  WINXP_7\FC4200.GPD
  WINXP_7\FC5100.GPD
  WINXP_7\FC612.GPD
  WINXP_7\TM1040.GPD
  WINXP_7\TM1030.GPD
  WINXP_7\TM1031.GPD
  WINXP_7\TM1220.GPD
  WINXP_7\TM1220B.GPD
  WINXP_7\TM1220S.GPD
  WINXP_7\TM1220R.GPD
  WINXP_7\JC9000.GPD
  WINXP_7\JX1000.GPD
  WINXP_7\JX2000.GPD
  WINXP_7\CE6120AP.GPD
  WINXP_7\GTCGLMON.DLL

  WINXP_7\JC80AXPM.TBC        For Color Adjustment
  WINXP_7\JC80AXST.TBC
  WINXP_7\JC80AXTC.TBC
  WINXP_7\JC80AXTM.TBC
  WINXP_7\JC80JRPF.TBC
  WINXP_7\JC80PRG.TBC
  WINXP_7\JC80RVLM.TBC
  WINXP_7\PRG.JX2

Required PC specifications
(The specication needs to be higher than recommended specification
 by using OS)
* OS             : Windows 7
                    (Ultimate / Enterprise / Professional / Home Premium)
                   Windows Vista
                    (Ultimate / Enterprise / Business / Home Premium / Home Basic)
                   Windows XP
                    (Professional / Home Edition)
* CPU            : Pentium III 800MHz or faster
* Memory         : 512MB or larger
* Display        : 1024x768 True Color
* Mouse
* CD-ROM drive
* USB interface  : USB2.0(Full Speed)
* Serial interface   : RS-232C
* Parallel interface : Centronics parallel interface
Note:
 The interface which can be used depends on the plotter model.
 The plotter needs to be connected with either interface.

Precautions to be observed when connecting the FC5100 or CE3000, FC3600, 
CE3000-120AP, MP303-04, CE5000-120AP, CE6000-120AP via USB
  * Supported OS
      Windows XP, Windows Vista or Windows 7
  * The plotter does not operate under Windows 3.1/95/98/98SE/Me or Windows NT.
  * Operation with other than the included driver is not guaranteed.
  * Do not connect multiple plotters to a single computer.
  * Operation is not guaranteed if the plotter is connected to a USB hub or to 
    a USB extension board. 


END
